Published figures
- Free height of fall
- 269 cm
- Age range
- 3–12 years
- Dimensions (L × W × H)
- — × — × 3.27 m
As published by Buglo. Park Plan never estimates a figure.
Installation and tender detail
| Materials | stainless steel, aluminium, polypropylene, polyethylene, hdpe, rope, ropes, rubber, steel |
| Colours | GreyTealBeigeseen in product image |
Description
Functionality: Balancing, Climbing, Emotion regulation, Grasping, Sliding, Socialization, Spinning. Assembly: Ground installation. Safety zone: 1327×1373 cm. Materials: Hexagon-shaped frame, made of steel pipes with a minimum diameter of 88.9 mm, manufactured from black steel, shot-blasted and protected against corrosion by zinc-rich primer in powder and powder coating. Bubbles spheres manufactured using the rotational moulding method from LDPE. Each sphere features four openings with a diameter of 50 cm. The internal surface has a delicate anti-slip texture and is additionally fitted with a polypropylene pp-multisplit rope net (16 mm diameter). Climbing stones made from a blend of aggregates and coloured polyester resins facilitate climbing on the spheres. The Bubbles are supported on loadbearing posts made of stainless steel pipe, minimum 60.3 × 3.0 mm. Modular polyethylene slide, including the starting section, manufactured by rotational moulding from LDPE material. Slide handrails made of stainless steel, cleaned in the process of bead blasting. Climbing module made of a bent tube formed into a hexagon shape, with a climbing element made of 10 mm thick reinforced rubber featuring a round anti-slip texture and milled openings secured with a 15 mm thick HDPE polyethylene board, as well as a rocking climbing wall mounted on a spring (200 mm diameter) made of spring steel rod with a diameter of 20 mm. Springs and their fixings are protected against corrosion by zinc-rich primer in powder and powder coating. The steps of the rocking wall are made of 15 mm thick HDPE polyethylene boards connected with 10 mm thick reinforced rubber with a round anti-slip texture. The wall is fixed to the ground using Ø6 mm stainless steel chains. Bridge made of 16 mm diameter polypropylene pp-multisplit ropes. The bridge platform is made of 10 mm thick reinforced rubber with milled openings and a round anti-slip surface. The bridge is connected to the frame using Ø6 mm stainless steel chains. Rope ends are secured in sleeves made of durable aluminium alloys. Climbing nets composed of multiple elements enhancing the climbing experience. The net is made
As written by Buglo.
Standards and certification
Published to EN 1176
Stated by Buglofor this range rather than on this product’s own sheet. Park Plan does not assess or verify compliance with any standard.
Warranty
up to lifetime| 10 years | HPL, HDPE, stainless steel, hot-dip galvanized steel, wooden elements (pine, spruce) |
| 5 years | powder coated steel, aluminum, laminate, ropes, elements made in rotomoulding technology, elements made of polyamid, polypropylene elements |
| 2 years | rubber, moving elements ( bearings, joints), electronic elements, elements made of EPDM, elements made of plywood |
| Lifetime | the durability of components made of HDPE (high-density polyethylene), as well as the structural integrity of components made of black steel that has been powder galvanised and powder coated, stainless steel, and components made of hot-dip galvanised steel. 9527 |
Terms as stated by Buglo.
